Analytical-industries GPR-1600 Series Trace PPB Oxygen Analyzer Manuel d'utilisateur télécharger pdf (Page 29)

Advanced Instruments Inc.

ALARM Sample

* Set Alarm 1

Set Alarm 2

Alarm 1 HI

Alarm 2 HI

Alarm 1 ON

Alarm 2 ON

Alarm Timeout

Auto Range 0 to 10 PPM

85⁰F 100Kpa 12/31/07 12:00:00

Advance the cursor (*) to the “Set Alarm 1” option and press the green ENTER key to accept the selection.

The following menu appears:

Sample

20%

Press UP or DOWN

to change value

ENTER to Save

ESC to Return

Auto Range 0 to 10 PPM

85⁰F 100Kpa 12/31/07 12:00:00

Follow the prompt above and press the ENTER key to save the alarm value (% full scale) or ESC to return to the MAIN MENU.

Within a few seconds after pressing the ENTER key, the system returns to the MAIN MENU.

Repeat the above steps for “Set Alarm 2”.

Configure Alarm 1 and Alarm 2 by advancing the cursor (*) to the desired feature as illustrated below.

ALARM Sample

Set Alarm 1

Set Alarm 2

* Alarm 1 HI / LO

* Alarm 2 HI / LO

* Alarm 1 ON / OFF

* Alarm 2 ON / OFF

Alarm Timeout

Auto Range 0 to 10 PPM

85⁰F 100Kpa 12/31/07 12:00:00

Press the ENTER key to toggle between the settings: HI and LO and/or ON and OFF.

After toggling, the system returns to the MAIN MENU. To confirm selection, re-access the ALARM menu above.

Advance the cursor (*) to the “Alarm” option and press the green ENTER key to accept the selection.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 54 55

Pas de commentaire

Analytical-industries GPR-1600 Series Trace PPB Oxygen Analyzer Manuel d'utilisateur Page 29