Analytical-industries GPR-28 Oxygen Analyzer Manuel d'utilisateur télécharger pdf (Page 16)

Advanced Instruments Inc.

Mounting the Analyzer

The oxygen analyzer consists of two PCB assemblies, sensor housing and sample system valves. An optional temperature

controlled heater system enhances stability during low ppm measurements. In standard configuration the alarm controls are

integral to prevent tampering, however, as illustrated below the alarm controls can be accessed externally with approved

actuators.

These components are packaged in a compact 8” x 8” x 8” wall mount enclosure. Designed for mounting on a flat vertical

surface approximately 5 feet above the floor by bolting the mounting feet attached to the rear of the enclosure. The user is

responsible for selecting the appropriate bolts to support at least 80 pounds.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 38 39

Pas de commentaire

Analytical-industries GPR-28 Oxygen Analyzer Manuel d'utilisateur Page 16